RCT-35SW Switch-Gear Current Transformer

Enquire for Price – Discounts for large orders



Solid Rogowski Coil

The Magnelab solid Rogowski coil current sensors measure AC current up to a peak of 15,000 amps. Basically, the rugged, epoxy encapsulated construction makes the sensor ideal for switch-gear applications in harsh environments, such as switching equipment used in the transmission of electricity. This part is constructed to IEEE C57.13 insulation standards.

RCT-35SW Switch-Gear Current Transformer


  • Inputs: 1000 A, peak 15,000 A
  • Outputs: 140 mV at 1000 A at 60 Hz
  • DCR: 102 Ω
  • Inductance: 0.820 mH
  • Linearity Accuracy 1.0 compliant with IEC 61869-2
  • Accuracy from 0.5 A to 15,000 A
  • Phase angle < 0.1° (from 90° with unintegrated output)
  • Best performance when used with Magnelab Integrator
  • Otherwise, suggested minimum input impedance: 10 kΩ
  • 8 ft. shielded and insulated leads 600 V, 18 AWG
  • Maximum Voltage: 600 V (on bare conductor)
  • Custom length is available
  • Operating Temperature: -40°C to 85°C
  • Storage Temperature: -45°C to 105°C
  • UL Listed Pending
  • Weight 173 grams

to learn more about this Switch-Gear Rogowski Coil.

Magnelab reserves the right to modify products to make improvements without advance notice.


There are no reviews yet.

Be the first to review “RCT-35SW Switch-Gear Current Transformer”

Your email address will not be published. Required fields are marked *