Current Sensor Customization
This article explains how to order a current sensor with one or more customizations

  1. Start on the page of the product you wish to purchase.
  2. Select the Amp Rating of your choice.
  3. Scroll down, past the product “Description” and “Features” to the “Accessories” section.
  4. Review all the options available to your product; each accessory has a link you can follow to get a description of the customization.
  5. Once you know what customizations you want, click the box underneath the description to put a check mark in the box.
  6. It is possible to check multiple boxes if you need more than one customization.
  7. Next, scroll to the top of the page and click the red “add to cart” button.
  8. You will be directed to your “Shopping Cart”.
  9. Once in your shopping cart you can review the products you have selected along with their amp value and the quantity of each. Notice that the default quantity for customizations is “1” so be sure to change it to correctly reflect your order.
  10. If you need to remove an item you can do so by clicking on the “x” in the red box to the far right of item.
  11. Once you are satisfied with the accuracy of the order you map click the “proceed to checkout” button.
In addition to the customizations we advertise, we may be able to offer other custom modifications that are not listed in our “Accessories" section. For more information call (303)772-6100. Prices and availability vary.

Common Customizations
This describes the common customizations we provide, including the expected lead time addition and any associated cost.

  • 12’ Twisted Pair Lead Length - Adding this item to your cart will exchange the existing 8' twisted pair leads for 12' twisted pair leads. The leads are black and white wires twisted together with approximately one twist per inch.
    • Lead Time: Expect 2-3 days for orders under 10 units, one week for orders over 10 units
    • Cost: $5/unit
  • 20’Twisted Pair Lead Length - Adding this item to your cart will exchange the existing 8' twisted pair leads for 20' twisted pair leads. The leads are black and white wires twisted together with approximately one twist per inch.
    • Lead Time: Expect 2-3 days for orders under 10 units, one week for orders over 10 units
    • Cost: $5/unit
  • 12’ Gray Lead Length - Adding this item to your cart will exchange the existing 8' gray leads between the rope and the integrator for a 12' gray lead. The gray leads have a gray colored jacket that prevents noise.
    • Lead Time: Expect 2-3 days for orders under 10 units, one week for orders over 10 units
    • RCT Cost: $10/unit
    • RCS Cost: $25/unit
  • 20’ Gray Lead Length - Adding this item to your cart will exchange the existing 8' gray leads between the rope and the integrator for a 20' gray lead. The gray leads have a gray colored jacket that prevents noise.
    • Lead Time: Expect 2-3 days for orders under 10 units, one week for orders over 10 units
    • RCT Cost: $10/unit
    • RCS Cost: $25/unit
  • 0-1V Output Option - Adding this item to your cart will change the output from 0-333mV to 0-1V.
    • Lead Time: Expect 2-3 days for orders under 10 units, one week for orders over 10 units
    • Cost: $7/unit
  • 0-2V Output Option - Adding this item to your cart will change the output from 0-333mV to 0-2V.
    • Lead Time: Expect 2-3 days for orders under 10 units, one week for orders over 10 units
    • Cost: $7/unit
  • 0-5V Output Option - Adding this item to your cart will change the output from 0-333mV to 0-5V.
    • Lead Time: Expect 2-3 days for orders under 10 units, one week for orders over 10 units
    • Cost: $7/unit
  • eGauge 2-pin Tyco connector - This accessory will add the eGauge 2-pin Tyco connector to the end of the terminals. You will need this if you are connecting the current sensors purchased to an eGauge power meter (you probably won't need it otherwise).
    • Lead Time: Half a day
    • Cost: $1/unit